Hollon RG-22 Republic Gun Safe
Our Price is Too Low to Show.
Add to cart to reveal your exclusive price — guaranteed lowest anywhere.
Fire Rated
1400°F · 120-min torch resistant
4-Way Boltwork
14 × 1.5" active chrome bolts
Assembled in USA
10-gauge body & 3-ga. door
Lifetime Warranty
Covers fire, break-in & paint
The Republic RG-22 gun safe is UL Residential Security Container (RSC) Burglary Rated due to its thick ¼” steel plate door, 10 gauge steel body and ten 1 ½” thick solid steel locking bolts. The RG-22 Republic Gun Safe will protect your valuables stored inside the safe during a fire at 1400 degrees F for 2 hours. The RG-22 has an intumescent door seal that will expand during a fire to multiple times its size to prevent smoke from entering your safe. On the front of the RG-22 you can have either the UL Rated S&G Electronic Lock or Option of selecting the UL Rated Mechanical Dial Lock. Either lock type will be protected by a drill resistant armored hard plate and spring loaded re-locker. The interior of the RG-22 gun safe comes with a deluxe carpet lined interior to protect your valuables from getting damaged or scratched while stored inside. Use any of the adjustable shelves and gun rack to organize both guns and other valuables inside. On the door panel comes a deluxe door organizer that comes with pistol holsters and storage pockets sewn into the panel to provide even more storage options inside your safe.
Interior
Ultra Plush Fully Adjustable Interior
The Republic interior is built for serious collectors. A full-length adjustable shelf reinforced with steel beams, three small removable shelves, a removable gun rack, and a newly designed pocket door organizer give you complete flexibility over your storage layout.
- Full-length steel-reinforced adjustable shelf (~50 lb capacity)
- 3 small adjustable/removable shelves
- Removable gun rack + pocket door organizer
- LED motion light kit + electric outlet installed
Security
14 Active Chrome Bolts · 3-Gauge Steel Door
The Republic door is built to stop forced entry cold. A 3-gauge solid steel door with 1/4" hard plate, 14 active 1½" chrome-plated locking bolts covering all four sides, an armored ball bearing hard plate, and a spring-loaded re-locker combine to exceed California DOJ standards for residential security containers.
- 3-gauge solid steel door for pry bar resistance
- 14 × 1½" active chrome-plated locking bolts
- Drill/ballistic resistant armored ball bearing hard plate
- Active spring-loaded re-locker against punch attacks
Fire Protection
1400°F · 120-Minute Torch-Resistant Rating
The Republic Series is torch-resistant and fire rated for 120 minutes at 1400°F — one of the highest ratings in its class. A heat-activated expandable intumescent door seal locks out smoke and water alongside flames, giving your valuables the best chance of surviving the worst.
- Torch-resistant rated for 120 mins at 1400°F
- Heat-activated intumescent door seal
- Seals out smoke and water as well as flames
- Exceeds California DOJ residential security standards
Engineering
What a Difference a Hinge Makes
Hollon uses their own solid steel No-Sag Hinge design — costing roughly 500% more than industry-standard hinges. Lesser hinges use a hinge cap to look larger than they are, and eventually sag, causing the door to stick and requiring you to lift the handle just to open it. Hollon hinges are welded directly to the safe and built for decades of trouble-free use.
- Solid steel No-Sag Hinge — not adjustable, not capped
- Welded directly to the safe body
- 500% more material than competitor hinges
- Full 180° door opening radius
Safe Specs & Dimensions
| Model | Exterior H×W×D | Interior H×W×D | Cu. Ft. | Weight (lbs) | Active Bolts | Guns |
|---|---|---|---|---|---|---|
| RG-22 | 59" × 30" × 24" | 56" × 26" × 16" | 16.93 | 800 | 14 — 1.5" | 22 |
| RG-39 | 59" × 39" × 24" | 56" × 34.25" × 15" | 22.5 | 925 | 14 — 1.5" | 39 |
| RG-42 | 72" × 42" × 28" | 68.75" × 37.25" × 19" | 32.5 | 1,250 | 14 — 1.5" | 42 |
| All measurements ± .25" | ||||||